This is a 14L Benchtop 8 Stage Water Filter.

8 stages of filtering include Ceramic Carbon Mineral Silica and more for purifying water. Non cooling.

Using the latest filtration technology, our 8 Stage Purifier Benchtop Water Filter can be used at your home, office and at schools and provides the purest drinking water.

The 8 stage filtration system is specially designed to purify your drinking water to the optimum level. The 8 stages assure your water is free of organic contaminants, lead and all bacteria in addition to being softened and pH stabilised. No more germs, no more rust, no more bacteria, no more bad taste, just drinking water at its finest, and for a fraction of the cost of a bottled water addiction.

Important Note: Never overfill the upper tank. If the lower tank is half full, you can completely fill the upper tank. If the level of water in the lower tank is higher than half, you must not fill the upper tank, or leakage may occur through the joining ring.

8 Stages Of The Filtration Process

1. Ceramic Filter: The main content of the ceramic filter consists of highly compressed ceramic diatom, its competent resistants is increased through high temperature and quality manufacture. It functions as a filter for dirt solids and dangerous bacteria such as typhoid, cholera, bilharzia and amoebas.
2. Activated Carbon and Silver Activated Carbon: Removes chlorine, THMs, organic chemicals and unpleasant odours and colours, the end results are pure, crystal clear mineral water.
3. Quartz / Silica Sand: Removes acidic components from the water and thereby brings about a PH balance.
4. Red Mineralising Balls / Zeolite: Removes heavy metal such as lead, mercury, gold and silver. Heavy metals can accumulate in our bodies, high levels of heavy metals lead to a wide range of terminal illnesses.
5. Mineral Sand: Releases minerals, adjusts the PH of water to mild alkaline which helps restore the PH balance of the body fluid.
6. Red Mineralising Balls / Zeolite: Removes heavy metal such as lead, mercury, gold and silver. Heavy metals can accumulate in our bodies, high levels of heavy metals lead to a wide range of terminal illnesses.
7. Ceramic Pad: Further particle filtration
8. Magnetic Tap: Surrounds the water with magnetic energy, increasing oxygen as the water flows out.

Specifications:

• Type: Activated Carbon
• Use: Household / Office Pre-Filtration
• Total Capacity: 14 Litres
• Dimensions (cm): 29 (L) x 29 (W) x 60 (H)

Package Includes:

8 Stage Benchtop Water Filter 14L.

Please Note: Cartridge hanger is not included or required for 14L Benchtop unit.

FAQ - Frequently Asked Questions

• Does the unit come with all filters included?
• The unit comes full and ready to go, it includes all filters.
• How many litres of water does the unit filter?
• The main filter can filter anywhere from 500L to 1,000L depending on the quality of the water.
• Do we sell the replacement filters?
• We sell all replacement filters in packages, bulk discounts, etc.
• How do i install the tap?
• The tap comes with 2 small rubber rings plus 1 plastic nut bolt. Place 1 ring on the tap, then place the tap into the tank (into the hole on the side of the lower tank). Now place the second rubber ring from the inside of the tank around the tap. Finally attach the nut bolt to the tap, whilst making sure that the flat side of the nut bolt is sitting flush against the inside wall of the tank.
• If i want to use my own ceramic filter, what is the size of the holes where it sits?
• The Diameter of where the ceramic filter sits on the water filter is approximately 11cm for the larger hole and 2cm for the little hole.
• How quick is the filtering of the water?
• The 7 stage process filtration is really quick to filter through. Only the 1st stage of the process, the ceramic filtering, is the longest one and filters about 1 Litre per hour. The main reason is that the ceramic filter consists of highly compressed ceramic diatom which act as a filter for dirt solids and dangerous bacteria such as typhoid, cholera, bilharzia and amoebas, among others.
• How to setup the water filter?
• It is recommended to soak all filters for about 24 hours, and rinse thoroughly, before setup and first use.
• Please follow the setup instructions to setup your filter, parts should fit on top of each other and should be pretty straightforward to setup. Please make sure you tighten the tap connection and the seals are flush on the tank.